POLYTRON® PT 6100D Stand Dispersion Unit (High End Line)
« Application volume 0.1 ml to 30 litres »
The PT 6100 D Homogenizer is the most versatile unit of its type on the market today. This unit was specifically designed along with the 3100D due to many customer requests. Their applications required exactly reproducible conditions or needed different speeds for varying times or were processing temperature sensitive products. They also wanted to be able to control the unit from a PC. This unit meets all of those requirements. The bright and informative display shows all parameters. Any and all parameters can either be entered by membrane keypad or the PC interface using the KIN software. If so desired, results can be recorded and printed out in an Excel format. More than 30 dispersion aggregates with different geometries, designs, sizes, materials and coatings are available for selection.
ADVANTAGES
- 1700 Watt motor provides sufficient power and high speed necessary for efficient particle size reduction
- Digital motor speed control from 500 to 30,000 rpm
- Aggregate tip speeds up to 32 m/s produce the finest particles possible
- Soft start prevents splashing of homogenate from sample vessel
- Integrated overheating, overload and blocking protection
- Speed remains constant even when viscosity changes
- Membrane keyboard permits easy finger tip entry of parameters and operation
- Selection of three operating modes: standard, timed and auto
- PC interface (RS232) for control via KIN software
- Aggregate replacement using one-handed quick-release coupling
- Insulated motor housing keeps motor noise to a safe, approved level during operation
- Various models of dispersing aggregates which are Easy-to-Clean and designed for many different applications
Digital display for showing different process parameters and messages
- Target speed [TS, rpm]
- Actual speed [AS, rpm]
- Power input [Pin, W]
- Power output [Pout, W]
- Torque [M, Ncm]
- Motor current [I, A]
- Voltage supply [U, V]
- Product temperature (with optional Pt100 temperature probe) [TP, °C]
- Internal controller temperature [Tc, °C]
- Operating hour counter [Oh, h]
Accessories
Vessel holders or anti-slip mats with our stands.
Glass dispersion vessels which eliminate vortexing and improve homogenization efficiency
Accessories for this drive
Dispersing-Aggregates
11030075 PT-DA 20/2EC-B193
11030077 PT-DA 20/2MEC-B193
11030080 PT-DA 20/2WEC-B193
11030101 PT-DA 30/2EC-B250
11030102 PT-DA 30/2G-B273
11030104 PT-DA 30/2MEC-B250
11030110 PT-DA 30/2WEC-B250
11030112 PT-DA 30/2ZEC-B250
11030114 PT-DA 30/4EC-B250
11030115 PT-DA 30/4G-B273
11030144 PT-DA 36/2EC-B250
11030146 PT-DA 36/2G-B273
11030145 PT-DA 36/2MEC-B250
11030141 PT-DA 36/2WEC-B250
11030147 PT-DA 36/4EC-B250
11030148 PT-DA 36/4G-B273
12030021 PT-DA 36/BEC-B250 (BIOTRONA)
11030161 PT-DA 40/2EC-B250
11030162 PT-DA 40/2G-B273
11030... PT-DA 40/2MEC-B250
11030168 PT-DA 40/2WEC-B250
11030197 PT-DA 45/2EC-B250
11030182 PT-DA 45/2G-B273
11030... PT-DA 45/2MEC-B250
11030198 PT-DA 45/2WEC-B250
11030193 PT-DA 45/6EC-B250
12030031 PT-DA 45/BEC-B250 (BIOTRONA)
11030211 PT-DA 50/2EC-B250
11030212 PT-DA 50/2G-B250
11030214 PT-DA 50/2MEC-B250
11030219 PT-DA 50/2WEC-B250
11030224 PT-DA 50/4EC-B250
12030100 PT-DA 53/DI-B250 (DISSOLVER)
11030241 PT-DA 60/2EC-B250
11030242 PT-DA 60/2G-B250
11030244 PT-DA 60/2MEC-B250
11030249 PT-DA 60/2WEC-B250
Vessels
11050010 GS 15, working volume max. 35 ml
(clover leaf shaped, borosilicate glass)
11050020 GS 15 K, like GS 15, with screw cap
11050030 GS 15 KL7.5, like GS 15 K, lead through 7.5mm
11050011 GS 25, working volume max. 150 ml
11050021 GS 25 K, like GS 25, with screw cap
11050031 GS 25 KL12, like GS 25 K, lead through 12mm
11050032 GS 25 KL20, like GS 25 K, lead through 20mm
11050012 GS 40, working volume max. 500 ml
11050022 GS 40 K, like GS 40, with screw cap
11050033 GS 40 KL20, like GS 40 K, lead through 20mm
11050034 GS 40 KL25, like GS 40 K, lead through 25mm
11050013 GS 50, working volume max. 1000 ml
11050023 GS 50 K, like GS 50, with screw cap
11050035 GS 50 KL20, like GS 50 K, lead through 20mm
11050036 GS 50 KL25, like GS 50 K, lead through 25mm
11050014 GS 60, working volume max. 1300 ml
11050024 GS 60 K, like GS 60, with screw cap
11050037 GS 60 KL20, like GS 60 K, lead through 20mm
11050038 GS 60 KL25, like GS 60 K, lead through 25mm
11050050 GS 100, working volume max. 3000 ml
(clover leaf shaped, stainless steel)
11050051 GS 130, working volume max. 4000 ml
11050052 GS 150, working volume max. 6000 ml
11050053 GS 190, working volume max. 1300 ml
11050060 GS 100Z, working volume max. 900 ml
(cylindrical, stainless steel)
11050061 GS 130Z, working volume max. 2000 ml
11050062 GS 155Z, working volume max. 3500 ml
11050063 GS 175Z, working volume max. 4500 ml
11050064 GS 200Z, working volume max. 7000 ml
11050065 GS 230Z, working volume max. 9000 ml