Introduction:
This cannula has an upward projection of 5mm and is designed to attach PE tubing directly to it eliminating the use of an Internal.
Customer also chooses the pedestal height: either 4mm or 8mm.
The holes in the flange can be used to suture it into a back-mounted position.
The stainless steel tubing is bent 90 degrees below the pedestal.
Pedestal diameter: 3.5mm (.138”)
Flange height: 1mm (.04”)
Flange diameter: 10mm (.394”)
Hole diameter: 1.56mm (.063”)
Length below pedestal: 7.3mm (0.287")