Introduction:
This cannula has a 5mm upward projection designed to attach PE tubing directly to it eliminating the use of an Internal. The holes in the flange can be used to suture the cannula into a back-mounted position.
The stainless steel tubing is bent 90 degrees below the pedestal.
Uses C313CAC Dust cap.
Pedestal diameter: 3.5mm (.138”)
Flange height: 1mm (.04”)
Flange diameter: 10mm (.394”)
Hole diameter: 1.56mm (.063”)
Length below pedestal: 7.3mm (0.287")
Mates with: MH-300 Mounting Holder