The Next Generation in High Precision Nanoliter Microinjection.
User-Friendly Programmable Touchscreen Operation - Potential Applications Expanded
Easy Positive Micropipet Attachments - No O-Rings Required
Proven Hydraulic Technology - Ensures Accurate and Consistent Injection Volumes
Universal Power Source - Supplied with 4 Interchangeable Adapter Plugs
The new Programmable Nanoject III Nanoliter Injector offers a number of state-of-the-art features to provide easy setup and operation as well as more accurate injection volumes down to 0.6 nanoliters. The Nanoject III does not require any O-rings to secure the micropipet. Operational Modes enable the user to program the unit to do single manual injections, as well as multiple injection cycle recipes. Program input and execution is enabled by prompted touchscreens located on the control box. Programmability, the lower injection volume capability plus the user's ability to select the injection rate widens the potential range of applications for the Nanoject III. The Universal Power Source provides adapter plugs to enable the unit to be used in the US, UK, Europe, and Australia simply by inserting the proper plug.
Power Source - 100/240 volt, 50/60 Hz
Total Sample Volume - 4.2 μL
Fill / Empty Volume Speed - 10 - 200 nL/sec
Injection Volume Range - 0.6 - 999.9 nL
Injection Rate - 10 - 200 nL/sec
Plunger Travel - 23 mm
Glass Micropipet Dimensions - OD 0.045˝ (1.14 mm)
ID 0.021˝ (0.53 mm)
D3-000-207 kit contains the following items
| Cat. No. |
Description |
| D3-000-037 |
Control box & power source |
| D3-000-030-B |
Injector head |
| D3-000-031 |
Injector head cable |
| D3-000-203-G/X |
100 pcs., 3.5˝ glass capillaries |
| D3-000-203-G/XL |
100 pcs., 7˝ glass capillaries |
| D3-000-027 |
Backfilling needle |
| D3-000-024-A |
Universal adapter |
Accessories not included in kit:
| Cat. No. |
Description |
| D3-000-030-K |
Replacement collet kit (1 collet, 1 chuck, 1 seal, 1 wire plunger, 1 Allen wrench) |
| D3-000-030-C |
Replacement collet only |
| D3-000-000-207 |
Replacement wire plunger (Note: Not the same as the Nanoject II plunger) |
| D3-000-025-SB |
Support base |
| D3-000-024-R |
Micromanipulator, right hand |
| D3-000-024-L |
Micromanipulator, left hand |
| D3-000-032 |
Footswitch (remote capability for fill, empty and inject functions) |
